Showroom Open - Service Updates

Kolink Balance Gaming Case - Black - (CAS4071)

£47.99 inc VAT


In Stock for 2-3 Day Delivery Order for Pickup in 1-2 Days

Main Features

  • PSU not included
  • 2 x 2.5", 2 x 3.5" HDD Bay(s)
  • Max MB Size: E-ATX
  • Tempered Glass
  • LED Lighting

Overview

This feature-rich Midi-Tower case may have a stunning exterior, but behind this facade lies a lot of space for powerful gaming hardware. All this gaming goodness can be admired through the tempered glass side panel, and as it supports motherboards up to E-ATX in form factor, there will be plenty to look at. A thoughtfully included PSU shroud also helps users stash away unsightly cables. The front of the case, with its fine mesh and air vents, helps ensure not only good airflow, it also helps accentuate the digitally addressable RGB-LED strip and the look of the case as a whole. A switch on the I/O panel allows the lighting to be controlled. Alternatively, the strip can be connected directly to the motherboard and controlled that way instead. The overall ventilation of the case is also helped by the presence of a fine mesh with integrated dust filter on the top. A pre-installed 120 mm fan is also equipped with dARGB lighting.

Kolink Balance: Plenty of Space for Powerful Gaming Hardware

Even though the outer dimensions of the case are those of a Midi-Tower, the Balance uses its clever design in such a way as to make space for even an E-ATX board if necessary. Graphics cards up to 370 mm in length will fit comfortably, and even tall CPU coolers up to 162 mm in height will fit. One of the highlights of the case is the fact that GPUs can be mounted vertically using a PCI-E riser cable (sold separately) - meaning that users are really free to make their system stand out from the crowd. A PSU shroud conceals the power supply and the HDD cage, where two 3.5"- or two 2.5" drives can be installed. Two more 2.5" SSDs can be installed to the rear of the motherboard.

As for those who prefer to opt for air cooling, there are more than enough slots for 120 mm fans. The front allows for three 120 mm- or two 140 mm fans to be installed. The roof supports either two 120 mm or two 140 mm fans. The cover is equipped with a mesh that allows the system to benefit from a plentiful supply of fresh air - and this is combined with a dust filter to ensure the interior doesn't need frequent cleaning either. The rear of the case supports a high-performance 120 mm fan, a 360 mm or 280 mm radiator can be installed in the front, and a further 280 mm radiator can be installed in the roof if needed. The pre-installed 120 mm fan can be replaced with an identically-sized radiator.

Tempered Glass and RGB-LEDs: Showcase Your System

Thanks to the clever locations of the cable guides and brackets, users will enjoy the various benefits of smart cable management. All the more important as so much of the case is on show, thanks to the use of a tempered glass side panel. In the centre of the front of the case, users will find a strip with dARGB-LEDs. These LEDs and their effects can be controlled via a switch situated on the I/O panel. Alternatively, the strip can be connected directly to a compatible ARGB motherboard and controlled that way instead. Aside from the RGB button, there are also power- and reset buttons alongside a USB 3.0 port, two USB 2.0 ports, Power/HDD-LEDs, and a 3.5 mm jack for headphones and microphones.

Main Features:

  • Stylish Midi-Tower for motherboards up to E-ATX format
  • Tempered glass side panel for an unobstructed view of the interior
  • Front with fine-mesh ventilation grille
  • Attractive dARGB lighting on the front
  • A pre-installed 120 mm fan with dARGB lighting at the rear
  • Up to five 120 mm- and four 140 mm fans possible in total
  • Space for graphics cards up to 370 mm, CPU coolers up to 162 mm
  • I/O Panel with controller for RGB-LEDs, 1x USB 3.0 and 2x USB 2.0

Specifications

Storage
Internal Expansion Bays 2 x 2.5"
2 x 2.5"/3.5"
Expansion
Expansion Slots 7 x Full Height
2 x Vertical
Interfaces/Ports
USB Ports 1 x USB 3.0
2 x USB 2.0
Headphone Ports 1 x 3.5mm Jack
Microphone In Port 1 x 3.5mm Jack
Electrical
Cooling System Front: Supports 2 x 140mm or 3 x 120mm fans
Top: Supports 2 x 140mm or 120mm fans
Rear: Supports 1 x 120mm fan (ARGB fan included)
Power Supply ATX Power Supply supported
Warranty
Warranty 2 Years
Physical
Form Factor Mid Tower Case
Case Colour Black
Material Steel
Plastic
Tempered Glass
Motherboard Compatibility E-ATX
ATX
MicroATX
Mini-ITX
Width 210 mm
Depth 470 mm
Height 425 mm
Weight 6.2 kg
Item Details
Manufacturer Kolink
Part Number BALANCE ARGB
EAN 5999094003415
UPC 843816100850
Condition New

Questions

Reviews

View More Products Like This

Simliar Products

Corsair Carbide 200R Mid Tower Gaming Case - Black USB 3.0

£60.22
Next DayPickup Soon

Fractal Design Define XL R2 Full Tower Gaming Case - Silver USB 3.0

Corsair Obsidian 750D Full Tower Gaming Case - Black USB 3.0

£147.95
Next DayPickup Soon

AvP Viper Mini Tower Gaming Case - White USB 3.0

£21.18
Delivery/Pickup Soon