Water Blocks

A water block is the watercooling equivalent of a heatsink. It can be used on many different computer components, including the CPU, GPU, RAM, and Northbridge chipset on the motherboard. It consists of at least two main parts; the "base", which is the area that makes contact with the device being cooled and is usually manufactured from metals with high thermal conductivity such as aluminum or copper and in some cases silver as is found in many newer blocks.[citation needed] The second part, the "top" ensures the water is contained safely inside the water block and has connections that allow hosing to connect it with the water cooling loop. The top can be made of the same metal as the base, transparent Perspex, Delrin, Nylon, or HDPE. Most newer high-end water blocks also contain mid-plates which serve to add jet tubes, nozzles, and other flow altering devices.

A water block is better at dissipating heat than an air-cooled heatsink due to water's higher specific heat capacity and thermal conductivity. The water is usually pumped through to a radiator which allows a fan pushing air through it to take the heat created from the device and expel it into the air. A radiator is more efficient than a standard CPU or GPU heatsink/air cooler at removing heat because it has a much larger surface area.